Three-way tipper trailerMEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
Three-way tipper trailer
MEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
Preço fixo acresce IVA
42 900 €
(51 051 € bruto)
Ano de fabrico
2026
Condição
Novo
Localização
Egestorf 

Dados básicos
Preço e localização
Preço fixo acresce IVA
42 900 €
(51 051 € bruto)
- Localização do vendedor:
- Eichenstich 12, 21272 Egestorf, Alemanha

Ligar
Detalhes técnicos
Dimensões e peso
Peso total:
18 000 kg
Peso máximo de carga:
13 320 kg
Comprimento do espaço de carga:
4 900 mm
Largura do espaço de carga:
2 380 mm
Altura do espaço de carga:
900 mm
Eixos e rodas
Configuração de eixo:
2 eixos
Recursos de segurança
ABS
Detalhes da oferta
- ID do anúncio:
- A221-45-762
- Número de referência:
- 6296
- Atualização:
- por último em 15.09.2026
Descrição
Brakes:
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
Dcsdpfxszd I Dce Ag Uep
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
Dcsdpfxszd I Dce Ag Uep
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.
Fornecedor
Nota: Registe-se gratuitamente ou faça login, para aceder a todas as informações.
Registrado desde: 2001
162 Anúncios online
Enviar pedido
Telefone & Fax
+49 40 33... anúncios
O seu anúncio foi eliminado com sucesso
Ocorreu um erro


















































