Cama plana / Encerado

WEB-TRAILER 1-Achs-City-Sattelauflieger TRI LBW

PRSSQTri 09-SYS with body, 1-axle, LBW
Twin tires 22.5 TRIDEC
----

Curtainsider body Lateral height 2600 mm from loading area to
lower edge of outer beam
Maximum steering angle 31°
Mechanical steering system with 1 drawbar for steering one axle
Make: Tridec


Chassis width approx. 2480 mm
Maximum fifth wheel load approx. 12000 kg
Support winch position approx. 2300 from kingpin
Chassis length approx. 13620 mm
Axle loads: 10 000 kg
Unladen ride height approx. 1300 mm with fifth wheel height 1150 mm
Approval with COC papers

?outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness
approx. 4 mm, with lashing holes on the outside
13 pairs of lashing eyes in the outer frame
(tested lashing force 5t per lashing point)
24 to telescopic support winch

Axle
Free choice of axle make by WEB Trailers (SAF/BPW/Jost)
Axle with large disc brake
Axle 10t disc 22.5" twin tires

Air suspension unit per 10 t
Lifting and lowering device
Coupling head red and yellow
Lifting and lowering device mounted at the rear right in the direction of travel
Air tank 2 x approx. 80 l in steel, painted black
EBS brake system made by Knorr or Wabco incl. RSS

4 brand tires 275/70 R 22.5 brand on steel wheel (brand of your choice WEB Trailer)

Tire pressure control

Tail lift
Platform with roll-off protection
Steel platform - tear plate
Front plug connection for LBW as Rema socket (without batteries! optional)
Tail lift of our choice 2.5t
Documentation, manual etc.
Operation via control in the box at the rear right and remote control
with helical flex cable in the superstructure top right
Bwtzrshbyn
Platform height approx. 2000mm (standard rear lockable)
Blinker lights on the tail lift platform
Fuse and reverse polarity protection on positive and negative cable (red+blue)
Make of tail lift of your choice WEB Trailer

Body certificate in accordance with DIN EN 12642 XL (for 27t payload + tail lift) with at least 2 rows of wooden insert slats and locking at the top of the platform

Contour marking on tarpaulins and rear portal
ECE signs on tail lift
Rear upper position lights in red (LED)
Rear sliding roof fixed
Top flap for tail lift with gas pressure damper
Position lights at the front top and bottom in white with reflex (LED)
3 sets of side sliders Manufacturer's choice WEB
Standard steel bulkhead with 400 mm steel cassettes
Interior wear plate approx./max. 2.40m
3 rows of wooden slats

24 volt lighting system with small multifunction light
15-pin plug
flashing SML

Reinforced roof tarpaulin with 12x12 roof fabric
Tensioning ratchet at the rear, only release device at the front
2 steel bumpers at the rear corners
Plastic mudguards, 180 degrees
Antispray mud flaps
Side collision protection on both sides, steel profile or plastic

Body certificate in accordance with DIN EN 12642 XL


Coating/painting:

Painting of the chassis in RAL 9005 or Novagrau 7350 other colors at an extra charge only if color is available in powder

KTL coating with zinc phosphating plus powder, maximum corrosion protection

Hot-dip galvanizing optionally possible

Approval:

COC

Price ex works

Attention!!!
Pictures show special equipment

Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.

Subject to errors and prior sale!

O anúncio foi traduzido automaticamente e alguns erros de tradução podem ocurrer.